12A06

1/8" NPT Vent Limiting Orifice Brass Plug

87-300030-001

Primary Actuator Kit (PAK) - Actuator and Release Solenoid Assembly

87-120042-001

Secondary Actuator Valve (SVA) - Single Actuator, Requires Primary Release Actuator

87-300040-001

Pressure Switch - Monitors Tank Pressure, Supervised Signal

60-9196984-000

Vent Plug for Fire System Distribution Piping, CAS Electric Wet Chemical

WK-283952-000

Discharge Adapter, adapts TANK outlet to fire suppression piping

WK-108019-000

O-Ring for Discharge Adapter

OL-F

NOZZLE - TANK Protection Appliance Coverage Nozzle (female threaded) (Includes Metal Blow Of Cap, Lanyard, used with Chrome-plated pipe)

OL-M

NOZZLE - CORE Protection Appliance Coverage Nozzle (male threaded) (Includes Metal Blow Off Cap, Lanyard, used with Chrome-plated pipe)

87-120045-001

HOSE, Secondary Actuator Hose, 7.5" Braided Stainless Steel, TANK Fire Suppression

87-120045-002

HOSE, Secondary Actuator Hose, 24" Braided Stainless Steel, TANK Fire Suppression

87-120045-003

HOSE, Secondary Actuator Hose, 60" Braided Stainless Steel, TANK Fire Suppression

Image Not Available

PAKHOSEORING

O-Ring replacement used on Primary Actuator Kit braided hose (Hex style fitting).

87-300033-001

DIN Connector, Canfield Part #5J560-201-EU0A, CAS TANK Fire Suppression, Sub-miniature Solenoid Connection

SS2031ZA-EN

24VDC Single Action Manual Actuation Device (Push/Pull Station) With Protective Cover, One [1] Normally Open Contact. RED COLOR

STI-KIT71101AR

Junction Box for Manual Pull Station. 1.5" Deep Back Box, RED COLOR

STI-10196

24VDC or 120VAC NORMALLY OPEN CONTACT FOR MANUAL ACTUATION DEVICE (PUSH/PULL STATION)

STI-10198

24VDC or 120VAC NORMALLY CLOSED CONTACT FOR MANUAL ACTUATION DEVICE (PUSH/PULL STATION)

sf-10197h

Contact Housing Assembly for CORE Manual Actuation Device, Push Station STI-SS2431 and STI-SS244

NOTE: Color may vary.

SF-1331

CORE/TANK Protection Manual Actuation Device (Push/Pull Station) Cover Spacer SF-1331. Adds 1.5" to Protective Cover for Surface Mounted Junction Boxes. 

Replaces Old Part #STI-6531B; A/X #A0021216

C-032

Sporlan Catch-All refrigerant filter dryer. Inline male to male flare fitting for TANK PAK testing. 100mesh screen and 20micron polyester pad on the outlet.

Rated up to 650psi.  Required for connecting nitrogen to system for testing.  Do not introduce nitrogen to system for balloon testing without filter dryer in place.

PGW-500

Elitech wireless digital pressure gauge used for testing TANK PAK assemblies for bypass.

-14.5 to 500psi range. +/-0.5psi resolution.

WK-255681-000

Anti-Recoil Plate, TANK Fire Suppression

WK-255096-000

Valve Protection Plate, TANK Fire Protection

Not Available

87-300001-001

Tank Cylinder Assembly - Comes filled and pressurized, ready to utilize

Tanks may not be refilled after discharge.

87-300140-001

Hardware, Schrader Cap, CAS Electrical Wet Chemical

87-300141-001

Hardware, Schrader Valve, 1/4" NPT Male Threads CAS Electrical Wet Chemical

98694A115

Hardware, DATANKLOCK Locking Bracket Square Nuts 5/16" Zinc, TANK FIRE SUPPRESSION

87-300152-001

Hardware, SVA Bolts, CAS Electrical Wet Chemical

TANK FIRE SUPPRESSION-S-KIT

TANK Fire Suppression Full Fire System Service Kit, Includes Nitrogen Tank, Regulator, Hoses, and Fittings

Individual parts listed below

TANK FIRE SUPPRESSION-S-NOTANK

TANK Fire Suppression Partial Fire System Service Kit, Includes Regulator, Hoses, and Fittings

This kit does not contain a nitrogen tank.

U24

Low-Loss Brass Fitting for 1/4" Refrigerant Hose (Male to Male)

NABS

Low-Loss Brass Fitting for 1/4" Refrigerant Hose (Male to Female)

NHD1436

1/4" Refrigerant Hose, 36 inches long

NHD1460

1/4" Refrigerant Hose, 60 inches long

HP20

Service Nitrogen Tank, 20 cubic feet Capacity, Steel

GEN450F

Nitrogen Regulator, CGA580 Tank Fitting, 45 degree Outlet, 1/4" connection, 2 inch Gauges